How to replace broken refrigerator hinge

The refrigerator hinge is an important part of ensuring the normal opening and closing of the refrigerator door. When the fridge hinges is damaged, it is necessary to replace it in time. This article will walk you through the steps and considerations on how to replace broken industrial equipment boxes and commercial freezer hinges.

refrigerator door hinge replacement: Preparation

1. Power off the freezer and disconnect the power plug to ensure safe operation.

2. Prepare required tools, such as screwdrivers and wrenches.

refrigerator door hinge replacement Two: Remove the old hinge

1. Check the screws fixing the hinges on the refrigerator door and loosen the screws counterclockwise using a screwdriver.

2. Remove the old hinges from the freezer door and body. Keep the refrigerator door stable to avoid injury.

refrigerator door hinge replacement Three: Install new hinges

1. Align the new hinges with the mounting holes on the refrigerator door and body.

2. Use a screwdriver to tighten the fixing screws counterclockwise to ensure that the hinges are securely installed on the refrigerator.

 refrigerator door hinge replacementFour: Adjust the hinge position

1. Open the refrigerator door and check that the hinges are in the correct position. Make sure freezer doors open and close smoothly.

2. If necessary, use a wrench to adjust the hinge position so that the refrigerator door is aligned and closed tightly.

refrigerator door hinge replacement Five: Test and adjust

1. Connect the power supply to the refrigerator and turn on the power switch to ensure that the refrigerator works properly.

2. Open and close the refrigerator door several times to check whether the hinge is firm and whether the door can be smoothly closed.

Note:

1. Exercise caution during operation to avoid injury.

2. Select the hinge suitable for the model and specification of the refrigerator to replace it to ensure compatibility and quality.

3. If you are not sure about the operation procedure or encounter difficulties, seek professional technical help.

4. Before replacing the hinge, the original hinge can be cleaned and lubricated to extend its service life.

Below I recommend a few common refrigerator hinges, so that you can choose to replace the door hinges

The maximum opening Angle is 180 degrees, suitable for convex door installation, both left and right doors: Material: zinc alloy (ZDC) surface is plated with bright chrome, mainly suitable for cold storage doors, freezers and freezers.

The shaft can be disassembled, the six-hole installation increases the fastness of the installation, and the maximum opening Angle is 90 degrees. Stainless steel (SUS201), the surface is brushed and polished, mainly suitable for cabinets, distribution boxes, industrial boxes, etc.

Maximum opening Angle 180 degrees, suitable for convex door installation. The main material is stainless steel (SUS304) and zinc alloy (ZDC) surface for mirror polishing and bright chrome plating treatment, mainly suitable for freezing cold storage, industrial oven, kitchen equipment, etc.

With spring type can realize automatic return, with lifting function, the door will be raised when opened. The main material is zinc alloy (ZDC) surface for bright chrome plating treatment, mainly used with freezer, cold storage equipment doors.

Shaft can be disassembled installation, six-hole installation, increase the installation of fixed, the maximum opening Angle is 180 degrees, the main material is zinc alloy (ZDC) surface for bright chrome plating treatment, mainly used with chassis cabinets, electrical cabinets and industrial boxes.